VICKER CLEANERS are purging compounds developed with advanced with advance foreign know-how that cleaning out remain   
  pigments inside the screw of extrusion, injection
Grade
Suitable resins
application
Purging temperature
Cleaner P34
LPDE, HDPE, EVA, GPPS, ABS, HIPS, SAN
Injection, Extruder, Blow flim, Blow molding
180-240 ·c
Cleaner PC38
PMMA, PC, PET
Injection, Extruder, Blow flim, Blow molding
220-280 ·c
Cleaner 594
LPDE, HDPE, PP GPPS, ABS, HIPS, SAN, PMMA, PC, PET
Extruder, (Need to take off the screw)
180-240 ·c
 
 
EASYNESS IN HANDLING
CLEANER 594
PP RESIN
   
  1. Load CLEANER at the hopper [quantity depend on size of machine] until it is filled completely inside of the screw.
  2. Wait until 3-5 minutes and then run the machine, the residued resins and the burned pigments will purged together with the cleaner.
  3. If complete this then finally clean it with PP or the resin that has to be used in the next production.
  REMARK
  For the extruder machine, It will be open die head and take out the breaker plate before the cleaning
   
  1. To open die head and take out the breaker plate. After the temperature is set, load CLEANER 594 at the hopper until it is completely
      filled inside all the surface of the screw.
  2. Wait until 3-5 minutes and then run the machine. Once it is finished you may take the screw off for brushing

Home | About us | Activity | Product | Service | Quality Assurance | Knowledge | Contact us
© Copyright 2008 www.vickerpigment.com, All rights reserved.